Industry
Chemical > Vinyl Ester
-
C'POL 701AType: Bisphenol A Epoxy based Vinyl Ester Resin dissolved in Styrene Monomer.
Description: Structures made with C’POL-701A possess outstanding resistance to both acids and alkalies at room and elevated temperatures besides having resistance to cracking and excellent electrical and thermal insulation properties.
-
C'POL 711AType: Bisphenol A Epoxy based Vinyl Ester Resin dissolved in Styrene Monomer.
Description: C’POL – 711A has a HDT higher than that of C’POL – 701. Hence it is suggested for use in higher temperature applications. It has a lower monomer content. Hence emits lesser vapours during fabrication. Because of its higher HDT, better cure, lower exotherm and lower shrinkage it is also ideally suited for Mould making applications.
-
C'POL 731AType: Epoxy Novolac based Vinyl Ester Resin dissolved in Styrene Monomer
Description: C’POL - 731 A possesses greater retention of physical properties at higher temperatures. It also has better corrosion resistance to wide range of chemicals including certain organic solvents. As a result, C’POL - 731 A is found advantageous at places where bisphenol fumerate and general purpose vinyl ester resins are inadequate.
-
C'POL 7004
-
C'POL 7051
-
C'POL 7053Type: Vinyl Ester Fire Retardant Resin
Description: C’POL 7053 is a medium viscosity, Brominated Vinyl Ester resin based on Brominated epoxy resin. It is specially designed for good fire retardant properties. Structures made with this resin possess good chemical resistance and mechanical properties.
-
C'POL 7054
-
C'POL 7055Type: Vinyl Ester Fire Retardant Resin
Description: C’POL 7055 is a medium viscosity, Brominated Vinyl Ester resin based on Brominated epoxy resin. It is specially designed for good fire retardant properties. Structures made with this resin possess good chemical resistance and mechanical properties.
-
C'POL 7003
Industry
Chemical > ISO
-
C'POL 3601Type: Un saturated polyester resin based on Isophthalic acid
Description: C’POL 3601 is a medium viscosity, high reactivity useful in the fabrication of a wide range of FRP structures by hand lay up, filament winding and other conventional fabricating techniques. Laminates made with C’POL – 3601 possess moderate resistance to mild corrosive chemicals including water at ambient temperature.
-
C'POL 331Type: Unsaturated polyester resin based on Isophthalic acid.
Description: C’POL 331 is a medium reactivity,useful for the fabrication of a wide range of hand moulded FRP structures for Chemical Industry, Structures made with C’POL- 331 possess excellent resistance to water and host of corrosive chemicals such as dilute acids and salt solutions.
-
C'POL 3301Type: Unsaturated polyester resin based on Isophthalic acid
Description: C’POL 3301 is a medium reactivity, useful for the fabrication of a wide range of hand moulded FRP structures for Chemical Industry, Structures made with C’POL- 3301 possess excellent resistance to water and host of corrosive chemicals such as dilute acids and salt solutions.
-
C'POL 3311Type: Unsaturated polyester resin based on Isophthalic acid
Description: C’POL 3311 is a medium reactivity, useful for the fabrication of a wide range of hand moulded FRP structures for Chemical Industry, Structures made with C’POL- 3311 possess excellent resistance to water and host of corrosive chemicals such as dilute acids and salt solutions.
Industry
Chemical > PTA
-
C'POL 261
-
C'POL 2601Type: Unsaturated polyester resin based on Isophthalic acid.
Description: C’POL 2601 is high reactive unsaturated polyester resin based on Terephthalic Acid useful in the fabrication of a wide range of FRP structures by hand lay up, filament winding and other conventional fabricating techniques. Laminates made with C’POL 2601 possess moderate resistance to mild corrosive chemicals including water at ambient temperature.
-
C'POL 3311Type: Unsaturated polyester resin based on Isophthalic acid
Description: C’POL 3311 is a medium reactivity, useful for the fabrication of a wide range of hand moulded FRP structures for Chemical Industry, Structures made with C’POL- 3311 possess excellent resistance to water and host of corrosive chemicals such as dilute acids and salt solutions.
Industry
Water Treatment> ISO
-
C'POL 3601Type: Un saturated polyester resin based on Isophthalic acid
Description: C’POL 3601 is a medium viscosity, high reactivity useful in the fabrication of a wide range of FRP structures by hand lay up, filament winding and other conventional fabricating techniques. Laminates made with C’POL – 3601 possess moderate resistance to mild corrosive chemicals including water at ambient temperature.
Industry
Water Treatment> PTA
-
C'POL 2601Type: Un saturated polyester resin based on terephthalic acid
Description: C’POL 2601 is high reactive unsaturated polyester resin based on Terephthalic Acid useful in the fabrication of a wide range of FRP structures by hand lay up, filament winding and other conventional fabricating techniques. Laminates made with C’POL 2601 possess moderate resistance to mild corrosive chemicals including water at ambient temperature.